Determining the appropriate dimensions for a cleaning kit tailored to the 6.5 Creedmoor caliber is essential for effective firearm maintenance. The internal bore diameter of the 6.5 Creedmoor necessitates cleaning tools sized accordingly. This includes bore brushes and cleaning patches that fit snugly within the barrel to remove fouling and residue without causing damage. For instance, a brush that is too small will not adequately clean the bore, while one that is too large could potentially damage the rifling.
Proper firearm maintenance contributes to consistent accuracy, extends the lifespan of the barrel, and prevents malfunctions. Selecting the correct cleaning tool size is critical for achieving these benefits. Historically, incorrect cleaning practices have led to firearm damage and performance degradation. Therefore, understanding the specific requirements of the 6.5 Creedmoor caliber ensures optimal cleaning and preservation of the firearm’s operational capabilities.
The subsequent sections will address specific components of a cleaning kit, including bore brushes, cleaning rods, patch jags, and solvents, all considered in relation to their suitability for the 6.5 Creedmoor. Best practices for using these tools and products will also be explored, emphasizing techniques that promote effective cleaning without compromising the integrity of the firearm.
1. Bore Brush Diameter
The bore brush diameter is not merely a detail, but a foundational element dictating the efficacy of any cleaning kit intended for the 6.5 Creedmoor. Its selection directly impacts the firearm’s maintenance and, by extension, its performance and longevity. A misjudgment here can render the entire cleaning process futile, or worse, detrimental.
-
Effective Fouling Removal
A bore brush with a diameter precisely matched to the 6.5 Creedmoor’s bore is essential for effective removal of carbon fouling, powder residue, and copper deposits. If the brush is too small, it will simply glide over these contaminants, leaving them to accumulate and potentially impact accuracy. Conversely, a properly sized brush will engage the rifling, scrubbing away the buildup that degrades performance. Imagine a surgeon using an inappropriately sized tool the precision required for effective cleaning is similarly critical.
-
Prevention of Bore Damage
An oversized bore brush presents a significant risk of damaging the delicate rifling of the 6.5 Creedmoor barrel. Forcing an improperly sized brush through the bore can wear down the rifling, leading to diminished accuracy and a shortened barrel life. The rifling’s precise spiral grooves impart the necessary spin to projectiles for stabilization; any alteration to this geometry is detrimental. It’s akin to sanding away the grooves on a vinyl record the integrity of the system is compromised.
-
Material Compatibility
Bore brush materials typically bronze, nylon, or stainless steel interact differently with various bore surfaces and cleaning solvents. A brush that’s too aggressive, combined with certain solvents, can etch or corrode the bore, particularly in older firearms with less robust steel alloys. Understanding the chemical compatibility and abrasive properties of the brush material is critical to avoid unintended damage. Selecting the right material is like choosing the right cleaning agent for delicate antique furniture; the wrong choice can have lasting consequences.
-
Influence on Cleaning Solvent Distribution
The bore brush diameter plays a crucial role in the even distribution of cleaning solvents throughout the barrel. A properly sized brush, when saturated with solvent, ensures that the entire bore surface is exposed to the cleaning agent, maximizing its effectiveness. An undersized brush, however, may lead to uneven solvent application, resulting in incomplete cleaning. Effective solvent distribution is like evenly coating a cake with frosting consistency is key for optimal results.
Ultimately, the bore brush diameter is a linchpin in the configuration of what is considered the adequate size cleaning kit for the 6.5 Creedmoor. Choosing wisely is not merely about convenience, but about preserving the inherent accuracy and extending the operational lifespan of a precision instrument.
2. Patch Jag Fit
The patch jag, a seemingly simple component, stands as a critical bridge between solvent and steel within the bore of a 6.5 Creedmoor. Its fit, or lack thereof, directly dictates the effectiveness of any cleaning regimen. A properly sized jag, snug but not forcing, ensures optimal contact with the bore’s surface, while an ill-fitting one renders the entire cleaning process questionable. Considering it is directly tied to what determines an adequate size cleaning kit for the 6.5 Creedmoor.
-
Uniform Solvent Distribution
Imagine attempting to paint a wall with a roller that only makes contact in certain spots. This analogy captures the consequence of an undersized jag. Solvent is applied unevenly, leaving patches of fouling untouched. Conversely, an oversized jag forces the patch against the bore with excessive pressure, potentially causing the solvent to squeeze out prematurely, limiting its dwell time and diminishing its cleaning power. Uniformity is paramount for comprehensive residue removal, just as it is for achieving a flawless finish in any craft.
-
Effective Fouling Entrapment
The jag’s purpose extends beyond mere solvent application. It also serves to entrap and remove the loosened fouling from the bore. An ill-fitting jag allows this debris to bypass the patch, redepositing it further down the barrel. This is akin to sweeping a floor with a broom that scatters more dust than it collects. The appropriate jag, in contrast, acts as a squeegee, effectively capturing the debris and carrying it out of the bore, leaving behind a cleaner surface. It is about efficiently removing debris and preventing recontamination of the cleaned area.
-
Prevention of Bore Damage
While aggressive brushing can damage rifling, so too can an improperly sized jag. An oversized jag, forced through the bore, can exert undue pressure on the lands and grooves, potentially leading to wear and deformation over time. The risk is subtle but cumulative. Conversely, an undersized jag offers minimal resistance, making it tempting to use excessive force. This increases the risk of the cleaning rod bending or breaking, potentially causing scratches or other damage to the bore’s surface. A gentle, controlled pass with a properly fitted jag minimizes the risk of unintended harm.
-
Patch Retention and Integrity
A well-designed jag holds the cleaning patch securely, preventing it from bunching up or tearing within the bore. A loose patch can cause inconsistent cleaning, and a torn patch can leave fragments of material behind, further contaminating the firearm. The fit should be tight enough to ensure the patch remains intact and in contact with the bore, yet loose enough to allow for smooth passage. This balance requires a jag that is precisely matched to the bore diameter and the patch thickness. Secure retention and maintained integrity of the patch results in maximized cleaning results.
The relationship between “Patch Jag Fit” and the selection of “what size cleaning kit for 6.5 Creedmoor” is not a matter of mere convenience, but one of precision and care. The fit of the patch jag ensures an effective cleaning process, prevents potential damage to the firearm, and aids in secure patch retention and integrity. The right fit ensures the job is done right, keeping your 6.5 Creedmoor performing as it should.
3. Rod Length
The selection of rod length within the framework of “what size cleaning kit for 6.5 creedmoor” is not arbitrary. It is a practical consideration born from the necessity of maintaining a firearm’s integrity without causing unintended harm. The rod’s length directly impacts the cleaning process, its ease, and ultimately, the preservation of the 6.5 Creedmoors bore.
-
Accessibility and Reach
A rod too short necessitates the use of extensions or multiple passes, increasing the risk of the rod decoupling within the bore. This is akin to a surgeon using instruments too small for the operative field, requiring multiple attempts and increasing the potential for complications. A rod of sufficient length, however, allows for a single, smooth pass from breech to muzzle, minimizing disruptions and the potential for damage. The choice of rod length must, therefore, directly correlate to the 6.5 Creedmoors barrel length, ensuring full accessibility for thorough cleaning.
-
Structural Integrity and Flexibility
The rod’s composition and length influence its structural integrity. A longer rod, if too thin or made of inferior material, may flex or bend during use. This lack of rigidity can lead to uneven pressure within the bore, resulting in inconsistent cleaning or, worse, contact with the bore walls, causing scratches or wear. A thicker rod, or one crafted from a more durable material, resists bending but may lack the necessary flexibility to navigate tighter bores. Thus, a balance must be struck, prioritizing strength without sacrificing the ability to maneuver within the firearm’s barrel.
-
Handle Comfort and Control
The rod length impacts the leverage one can exert during the cleaning process, thereby affecting control. A rod that is too long in relation to the user’s reach may prove unwieldy, making it difficult to maintain a straight path through the bore. Conversely, a shorter rod may require excessive force, leading to fatigue and a reduced ability to feel for obstructions or tight spots. The handle design, coupled with the rod length, determines the overall comfort and control, factors that significantly influence the quality and thoroughness of the cleaning.
-
Storage and Portability
Consideration must also be given to the practical aspects of storage and portability. A cleaning kit featuring an excessively long rod may prove cumbersome to transport and difficult to store. In contrast, a shorter, segmented rod offers greater convenience but introduces potential weak points at the joints. The decision, therefore, involves weighing the trade-offs between ease of use and logistical considerations, ensuring that the “what size cleaning kit for 6.5 creedmoor” remains a manageable and practical tool.
In essence, the “Rod Length” element within “what size cleaning kit for 6.5 creedmoor” is a microcosm of engineering trade-offs. It is not merely a question of linear measurement but a careful calibration of accessibility, durability, control, and practicality. The correct choice ensures both the firearms long-term health and the user’s efficiency, transforming a chore into a mindful practice of preservation.
4. Solvent Compatibility
The notion of “what size cleaning kit for 6.5 creedmoor” might initially conjure images of brushes and jags, dimensions meticulously matched to the bore. However, lurking beneath the surface of those tangible components lies a subtler, often overlooked, yet equally critical consideration: solvent compatibility. It is the alchemical reaction between the cleaning agents and the materials they encounter that determines the true effectiveness, and indeed, the safety of the cleaning process. Picture an artisan meticulously crafting a masterpiece, only to apply a varnish that dissolves the paint; such is the potential consequence of neglecting solvent compatibility. The wrong choice can initiate a cascade of detrimental effects, corroding the bore, degrading the stock, or even compromising the integrity of the cleaning tools themselves. It’s a tale of unintended consequences, where a seemingly benign act of maintenance becomes an agent of destruction. Selecting the correct solvents is essential in maintaining not only the longevity and performance of the firearm itself but also the cleaning kit components.
Consider a case reported some years ago, a competitive shooter meticulously maintained his prized 6.5 Creedmoor, employing a potent bore solvent renowned for its efficacy in removing copper fouling. Initially, the results were impressive; the bore gleamed, and accuracy seemed to improve. However, over time, he observed a gradual decline in performance, coupled with an unsettling discoloration of the cleaning rod’s handle. Unbeknownst to him, the aggressive solvent was leaching plasticizers from the handle, causing it to become brittle and shed microscopic particles into the bore. These particles, in turn, acted as abrasives, accelerating wear and diminishing accuracy. This incident serves as a stark reminder that the components of “what size cleaning kit for 6.5 creedmoor” should be compatible. The story does not end there, it continues in the form of another shooter unaware and uninformed.
Therefore, a comprehensive understanding of solvent compatibility is paramount when assembling or selecting “what size cleaning kit for 6.5 creedmoor”. It necessitates careful consideration of the solvents chemical composition, the materials of the firearm’s bore and stock, and the construction of the cleaning tools themselves. Challenges remain, as manufacturers’ specifications are not always explicit, and anecdotal evidence can be misleading. Nevertheless, diligent research and a cautious approach, starting with gentle, proven solvents and gradually escalating as needed, can mitigate the risks. Ultimately, the goal is not simply to clean the firearm, but to preserve it; to ensure that each act of maintenance contributes to its longevity and consistent performance, rather than inadvertently hastening its demise.
5. Brush Bristle Material
The selection of brush bristle material within “what size cleaning kit for 6.5 creedmoor” dictates the character of the cleaning process itself. It is a decision that extends beyond mere convenience, reaching into the depths of material science and firearm preservation. Each materialbronze, nylon, stainless steelpossesses unique properties, interacting with the 6.5 Creedmoors bore in distinct ways. An incorrect choice can lead to accelerated wear, ineffective fouling removal, or, in extreme cases, irreversible damage. Consider a craftsman choosing a chisel: the tool’s material must be suited to the task, lest the workpiece be marred or the tool itself destroyed. The story of a rifle’s care is often written in the subtle wear patterns etched within its bore, a testament to the materials chosen and the methods employed.
A gunsmith, renowned for his meticulous approach, once recounted an incident involving a vintage 6.5 Creedmoor. The rifle, a family heirloom, had been subjected to years of well-intentioned but misguided cleaning practices. The owner, seeking a swift solution to stubborn carbon fouling, had employed stainless steel brushes with excessive force. Over time, the abrasive nature of the steel had worn down the delicate rifling, diminishing the rifles accuracy and value. What began as an effort to preserve the firearm had inadvertently hastened its decline. This cautionary tale underscores the importance of understanding the specific properties of each bristle material and matching them to the specific needs of the 6.5 Creedmoor bore. So to consider “what size cleaning kit for 6.5 creedmoor” should contain the right brush material. Bronze, with its softer nature, is often favored for general cleaning, while nylon offers a gentler alternative for more delicate surfaces. Stainless steel, though effective at removing stubborn fouling, demands a cautious and experienced hand.
In conclusion, the choice of brush bristle material is not a trivial detail, but a critical decision that shapes the longevity and performance of the 6.5 Creedmoor. It demands a careful consideration of material properties, cleaning goals, and potential risks. While convenience and cost may factor into the equation, the ultimate priority must remain the preservation of the firearms integrity. Only through informed decision-making can one ensure that the act of cleaning becomes an act of stewardship, safeguarding the 6.5 Creedmoor for generations to come. It is the connection to “what size cleaning kit for 6.5 creedmoor” that ensures the kit is suitable and will do the job.
6. Case Dimensions
The dimensions of a cleaning kit case, often relegated to a secondary consideration, wield surprising influence over the efficacy and longevity of “what size cleaning kit for 6.5 creedmoor”. The relationship is symbiotic: the case dictates the protection and organization of its contents, while the contents, in turn, define the minimum space required. A case too small compromises the kit’s completeness, forcing the omission of essential tools or resorting to makeshift solutions. A case too large introduces unnecessary bulk, hindering portability and inviting disorganization. The story of a marksman who underestimated this connection underscores the point. He favored a compact kit, prioritizing minimal weight. However, the cramped case forced him to bend his cleaning rod, eventually leading to a fracture. His pursuit of convenience ultimately undermined his equipment. Proper planning is a necessity.
Further, the case’s internal configuration governs how effectively the cleaning tools are shielded from the elements. A well-designed case incorporates individual compartments, preventing components from rubbing against each other and minimizing the risk of damage. Imagine the jostling and abrasion occurring within a poorly organized case, metal against metal, solvents leaking onto plastic. Over time, this constant friction can degrade the tools’ finish, dull brush bristles, and compromise the integrity of cleaning patches. By contrast, a case with tailored slots and secure closures preserves the tools in pristine condition, ensuring consistent performance over extended periods. A case’s durability and resilience must be the standard if the inside is to be kept in perfect condition.
The case dimensions, therefore, are not merely an afterthought but a critical determinant of the overall value and utility of the “what size cleaning kit for 6.5 creedmoor”. They dictate the kits completeness, protect its contents from damage, and influence its portability. While the specific dimensions will vary based on individual needs and preferences, the underlying principle remains constant: the case must be thoughtfully designed to accommodate the tools it houses and facilitate their effective deployment. The case can be seen as a portable safeguard for the cleaning instruments required by the owner, so the job will be preformed with expertise.
7. Component Durability
The phrase “what size cleaning kit for 6.5 creedmoor” often evokes images of measurements and dimensions, but a critical dimension lies beyond the purely numerical: component durability. The longevity of a cleaning kit is intrinsically linked to the resilience of its individual parts. A brush with flimsy bristles, a rod prone to bending, or a solvent bottle destined to leak renders the “correct size” a moot point. Imagine a craftsman assembling a set of tools, meticulously choosing each piece for its function, yet neglecting the quality of its steel. The set may initially appear complete, but its usefulness will be short-lived, the tools succumbing to wear and tear far sooner than anticipated. The reality is that Component Durability is the main factor that defines and dictates what “what size cleaning kit for 6.5 creedmoor” can effectively deliver. With the right Component Durability the kit will last longer and will be valuable to the owner for a very long time.
There once was a competition shooter, renowned for his meticulous care of his 6.5 Creedmoor, who prioritized size and portability over substance when selecting a cleaning kit. The kit, while compact, contained a cleaning rod made of a brittle alloy. During a crucial competition, as he attempted to clear a stubborn obstruction, the rod snapped, leaving a section lodged in the barrel. The incident cost him not only the match but also required costly gunsmithing to extract the broken piece. This unfortunate experience highlighted the fundamental importance of component durability, transforming the “correct size” from a matter of convenience to a critical factor in reliability and performance. The Shooter, then realized that Component Durability dictates the efficacy and longevity of “what size cleaning kit for 6.5 creedmoor”, and vowed to prioritize that from there on.
In summary, the pursuit of “what size cleaning kit for 6.5 creedmoor” necessitates a shift in perspective, moving beyond mere dimensions to embrace the enduring value of component durability. A cleaning kit is more than the sum of its parts; it is a system designed to preserve a precision instrument. Therefore, each component must be chosen not only for its function but also for its ability to withstand the rigors of repeated use. Prioritizing durability ensures that the cleaning kit remains a reliable companion, safeguarding the 6.5 Creedmoor for years to come. Any choice that values Component Durability will also ensure that the cleaning is more efficiently done and the Firearm will function as desired for a very long time.
Frequently Asked Questions About Cleaning Kits for 6.5 Creedmoor
Firearm maintenance is a practice steeped in tradition, a ritual passed down through generations of marksmen. However, the specifics can be nuanced, often leading to questions and uncertainties. These frequently asked questions aim to dispel common misconceptions and provide clarity regarding the selection and use of cleaning kits tailored for the 6.5 Creedmoor.
Question 1: Is a universal cleaning kit sufficient for a 6.5 Creedmoor, or is a dedicated kit necessary?
The allure of a universal kit is undeniable a single purchase promising to address the needs of various calibers. Yet, the 6.5 Creedmoor, with its specific bore dimensions, demands a more focused approach. A universal kit may contain components that are either ill-fitting or of insufficient quality, potentially compromising the cleaning process or even damaging the bore. While a universal kit might suffice in a pinch, a dedicated kit, tailored to the 6.5 Creedmoor, offers a superior level of precision and safety.
Question 2: How often should a 6.5 Creedmoor be cleaned?
The frequency of cleaning is a subject of ongoing debate among firearm enthusiasts. Some advocate for cleaning after every range session, while others subscribe to a more relaxed approach. However, a prudent approach considers the specific ammunition used, the environmental conditions, and the desired level of accuracy. High-volume shooting or the use of corrosive ammunition necessitates more frequent cleaning. Ultimately, the decision rests on a careful assessment of these factors, balancing the need for maintenance with the potential for wear.
Question 3: What type of bore brush is best for a 6.5 Creedmoor bronze, nylon, or stainless steel?
Each brush material possesses unique properties, making it suitable for different cleaning tasks. Bronze brushes are generally preferred for routine cleaning, effectively removing powder residue and light copper fouling. Nylon brushes offer a gentler alternative, ideal for delicate bores or for applying cleaning solvents. Stainless steel brushes are reserved for stubborn fouling, demanding a cautious and experienced hand to avoid damaging the rifling. The selection, therefore, depends on the specific cleaning needs and the user’s skill level.
Question 4: Can the same cleaning rod be used for both a 6.5 Creedmoor and a .223 Remington?
While the temptation to consolidate equipment is understandable, using the same cleaning rod for different calibers introduces potential risks. A rod designed for a larger caliber may be too thick to safely navigate the bore of a smaller caliber firearm, potentially causing damage. Conversely, a rod designed for a smaller caliber may lack the rigidity necessary for effectively cleaning a larger bore. It is, therefore, advisable to use dedicated cleaning rods for each caliber, ensuring a proper fit and minimizing the risk of damage.
Question 5: What is the best method for applying solvent to a cleaning patch for a 6.5 Creedmoor?
The manner in which solvent is applied to a cleaning patch can significantly impact its effectiveness. Over-saturation can lead to excessive solvent entering the action, potentially causing damage to the finish or affecting the firearm’s operation. Under-saturation, on the other hand, may result in insufficient cleaning. A prudent approach involves applying a few drops of solvent to the center of the patch, allowing it to evenly distribute before inserting the patch into the bore. The goal is to achieve a damp, but not dripping, patch that effectively coats the bore’s surface.
Question 6: How do I know when a 6.5 Creedmoor bore is thoroughly cleaned?
Determining when a bore is truly clean requires a discerning eye and a methodical approach. After repeated passes with solvent-soaked patches, a clean patch should emerge free of any visible residue or discoloration. However, this is not always a definitive indicator. A more reliable method involves using a bore scope to visually inspect the bore’s surface, ensuring that all traces of fouling have been removed. In the absence of a bore scope, a bright light can be used to examine the bore, looking for any remaining residue or imperfections.
In conclusion, selecting and using a cleaning kit for a 6.5 Creedmoor requires a combination of knowledge, skill, and attention to detail. By understanding the specific needs of the caliber and employing proper cleaning techniques, one can ensure the long-term accuracy and reliability of their firearm.
The next section delves into specific cleaning techniques, providing practical guidance on how to effectively maintain a 6.5 Creedmoor.
Tips on Optimizing Your 6.5 Creedmoor Cleaning Routine
Effective firearm maintenance transcends mere procedural steps; it is a commitment to precision, a recognition that the tools employed and the techniques applied directly influence the performance and longevity of the rifle. The narrative of skilled marksmen often intertwines with stories of meticulous cleaning regimens. Here are some insights gleaned from their experiences, each aimed at maximizing the benefits derived from the components within “what size cleaning kit for 6.5 creedmoor”.
Tip 1: Employ a Bore Guide. The unforgiving steel of a cleaning rod, when misdirected, can mar the delicate crown and rifling of a 6.5 Creedmoor. A bore guide acts as a sentinel, aligning the rod perfectly, mitigating the risk of abrasive contact. Think of it as the pilot’s steady hand, ensuring a smooth and safe passage through turbulent skies.
Tip 2: Embrace Patch Rotation. A single cleaning patch, dragged repeatedly through the bore, simply redistributes fouling rather than effectively removing it. Adopt a practice of rotating patches frequently, ensuring that each pass introduces a clean surface to lift away residue. Imagine a sculptor meticulously refining a form, patiently removing material layer by layer.
Tip 3: Allow Solvents Dwell Time. The chemical reactions that dissolve carbon and copper fouling require time. Resist the urge to rush the cleaning process. Allow the solvent to dwell within the bore for the recommended duration, giving it the opportunity to break down stubborn deposits. Envision a master chef allowing a marinade to infuse flavors, patiently waiting for the ingredients to meld.
Tip 4: Conduct a Visual Inspection. A bore scope, while an investment, offers an unparalleled view into the interior of a 6.5 Creedmoor. It allows for a definitive assessment of cleanliness, revealing imperfections and fouling that would otherwise remain hidden. Picture a surgeon employing advanced imaging technology to diagnose and treat with pinpoint accuracy.
Tip 5: Oil Sparingly. Over-lubrication attracts dirt and debris, negating the benefits of a thorough cleaning. Apply a thin, even coat of high-quality gun oil to protect the bore from corrosion, but avoid excessive accumulation. Think of it as a seasoned mechanic applying just the right amount of grease to a bearing, ensuring smooth operation without creating a sticky mess.
Tip 6: Clean from Breech to Muzzle. The direction of cleaning matters. Always clean from the breech end towards the muzzle, preventing fouling from being pushed back into the action. This simple practice minimizes contamination and ensures a more efficient cleaning process. Envision a river flowing downstream, carrying debris away from its source.
Tip 7: Consider Ultrasonic Cleaning for Bolt. The bolt, with its intricate crevices and tight tolerances, can be challenging to clean effectively using conventional methods. An ultrasonic cleaner offers a non-abrasive way to remove stubborn carbon buildup. It’s akin to a clockmaker using specialized tools to meticulously clean the delicate components of a timepiece.
These tips, drawn from the accumulated wisdom of experienced marksmen, elevate the simple act of cleaning to a disciplined practice. By incorporating these techniques into the 6.5 Creedmoor maintenance routine, the owner can enhance the performance, extend the lifespan, and safeguard the inherent accuracy of the rifle.
In the following section, we transition towards a concluding perspective, drawing together the key threads explored throughout this article.
The Lasting Echo of Precision
This exploration of “what size cleaning kit for 6.5 creedmoor” has journeyed beyond mere measurements, revealing a deeper connection between the tools of maintenance and the enduring performance of a firearm. From the precise fit of the bore brush to the resilient construction of the carrying case, each element contributes to a system designed to preserve accuracy and extend operational life. A poorly chosen kit is a gamble, a compromise that risks diminishing the rifle’s potential. A well-considered kit, however, is an investment, a testament to the owner’s commitment to responsible stewardship.
The tale is told not in words, but in the silent testimony of a well-maintained 6.5 Creedmoor. Each carefully executed cleaning, each judicious application of solvent, whispers of a dedication to excellence. The call is not merely to acquire the correct tools, but to embrace a mindset of meticulous care. For in the hands of a thoughtful owner, a 6.5 Creedmoor transcends its material form, becoming a legacy of precision passed down through time. Let the echo of that dedication resonate with every pull of the trigger.
