The timing of a vehicle’s initial lubricant replacement is a critical maintenance procedure. Delaying or ignoring this service can have long-term ramifications for engine health and performance.
Performing this maintenance at the recommended interval ensures optimal engine lubrication, removes initial wear debris, and contributes to extended engine life. Historically, recommendations were significantly shorter, but advancements in engine manufacturing and oil technology have generally extended these intervals.
Understanding the manufacturer’s guidelines, considering driving conditions, and monitoring oil life indicators are essential factors in determining the appropriate time for this crucial service.
1. Mileage
The odometer’s steady climb serves as a stark reminder of the mechanical ballet unfolding beneath the hood. Each rotation of the tires translates into revolutions within the engine, a process demanding constant lubrication. Mileage, in its simplest form, represents the distance traveled, but it also serves as a proxy for the cumulative wear and tear inflicted upon the engine oil. Consider the case of a delivery driver whose vehicle accrues thousands of miles in a short span. The oil experiences significantly more stress compared to a vehicle used sparingly for weekend errands. Reaching the prescribed mileage interval triggers a critical decision point: whether to adhere strictly to the number or factor in the intensity of use.
Manufacturers provide mileage-based guidelines, often ranging from 5,000 to 10,000 miles for modern vehicles, but these figures are predicated on typical driving conditions. An individual regularly towing heavy loads or navigating stop-and-go traffic should view these numbers as ceilings, not floors. Exceeding the mileage interval without accounting for these factors can lead to oil degradation, sludge buildup, and ultimately, reduced engine lifespan. Furthermore, neglecting this crucial maintenance point may also void the vehicle’s warranty, placing the burden of potential repairs squarely on the owner.
The relationship between mileage and scheduled lubricant replacement is not merely a suggestion, but a foundational element of preventative maintenance. While technological advancements have extended service intervals, the basic principle remains unchanged: the distance traveled directly impacts the oil’s ability to protect the engine. Ignoring the mileage milestone, particularly under arduous driving conditions, represents a gamble with long-term consequences, emphasizing the importance of meticulous record-keeping and proactive servicing.
2. Time Interval
The passage of time, an often-overlooked factor, exerts a subtle yet relentless influence on the integrity of motor oil. While mileage quantifies the engine’s operational strain, the temporal dimension reflects the degradation that occurs even when the vehicle remains stationary. Consider a scenario: a pristine new car sits garaged, its engine untouched for a year. Despite the odometer reading zero, the oil within is not immune to the ravages of age. Oxygen, exposure to residual combustion byproducts, and the natural breakdown of chemical additives all contribute to a gradual decline in its protective properties. This silent decay underscores a critical point: adhering strictly to mileage-based recommendations without considering the time elapsed can be a costly oversight.
Imagine an elderly individual who drives only sparingly, accumulating just a few thousand miles annually. Following solely the mileage interval, as prescribed by the manufacturer, might lead to a change only every two or three years. Yet, during this extended period, the oil’s viscosity can change, its detergents can lose effectiveness, and its ability to neutralize acids diminished. This can result in internal engine corrosion and premature wear, negating the perceived savings from extended maintenance intervals. A more prudent approach involves adhering to a maximum time interval, typically six months or one year, regardless of mileage. This ensures the lubricant retains its optimal protective qualities, safeguarding the engine against the insidious effects of time.
The interplay between time and mileage demands a nuanced understanding, particularly when determining the initial lubricant replacement schedule for a new vehicle. Neglecting the time component can create a false sense of security, leading to compromised engine health and potentially avoidable repairs. A balanced approach, factoring in both distance traveled and the duration since the last service, represents the responsible and informed course of action. This safeguards the vehicle’s performance and longevity, serving as a testament to the owner’s commitment to proactive maintenance.
3. Driving Habits
A vehicle’s operational environment, largely determined by driving habits, exerts a profound influence on the longevity and efficacy of its lubricating fluid. Unlike a controlled laboratory setting, the real world presents a spectrum of conditions that accelerate or decelerate the degradation process. The driver’s foot, pressing on the accelerator or brake, dictates the engine’s workload and, consequently, the oil’s burden. Ignoring these factors when scheduling the initial lubricant service can prove detrimental to the vehicle’s long-term health.
-
Short Trips and City Driving
Consider the urban commuter, their journey marked by frequent stops and starts. The engine rarely reaches optimal operating temperature, preventing complete combustion and allowing fuel to contaminate the lubricating fluid. This dilution compromises the oil’s viscosity and its ability to protect critical engine components. Furthermore, short trips prevent the oil from burning off accumulated moisture, contributing to sludge formation. The consequences are insidious: accelerated wear, reduced fuel efficiency, and potential engine damage. In such cases, adhering to a more frequent lubricant replacement schedule is not merely prudent, but essential.
-
Highway Cruising
Conversely, envision the long-haul driver, their vehicle effortlessly gliding along open highways. The engine operates at a consistent temperature and speed, minimizing fuel contamination and maximizing the oil’s lifespan. Under these conditions, the manufacturer’s recommended intervals may be sufficient, provided the oil level is regularly monitored and maintained. However, even highway driving is not without its challenges. Extended periods of high-speed operation can subject the lubricant to elevated temperatures, leading to thermal breakdown and reduced effectiveness. Therefore, a proactive approach, involving regular oil analysis, is advisable to ensure optimal engine protection.
-
Towing and Heavy Loads
The image of a truck straining under the weight of a trailer serves as a potent reminder of the increased stress imposed by towing and heavy loads. The engine works harder, generating more heat and placing greater demands on the lubricating fluid. This accelerated degradation necessitates more frequent lubricant changes to maintain adequate protection. Neglecting this crucial aspect of maintenance can lead to catastrophic engine failure, leaving the owner stranded and facing substantial repair bills. A conservative approach, involving a reduction in the recommended service interval, is highly recommended for vehicles regularly engaged in towing or hauling heavy loads.
-
Aggressive Driving
The spirited driver, known for rapid acceleration and hard braking, subjects their engine to extreme stress. Frequent bursts of high-rpm operation generate excessive heat, accelerating the breakdown of the lubricating fluid. Furthermore, aggressive driving often involves navigating challenging terrain, exposing the engine to increased dust and debris. These factors combine to create a hostile environment for the oil, demanding more frequent replacement to prevent premature wear and potential damage. In such cases, the driver’s habits directly dictate the need for a more proactive maintenance schedule, prioritizing engine protection over adherence to manufacturer’s recommendations.
The examples illustrate a fundamental principle: driving habits are not merely a lifestyle choice, but a critical determinant of a vehicle’s maintenance needs. Ignoring these factors when scheduling the initial lubricant service can lead to a false sense of security, resulting in compromised engine health and potentially avoidable repairs. A responsible owner carefully considers their driving habits, consulting with a qualified mechanic to establish a maintenance schedule that aligns with the vehicle’s operational environment. This proactive approach safeguards the engine’s longevity and ensures optimal performance for years to come.
4. Manufacturer’s Recommendations
Within the labyrinthine world of automotive maintenance, a single document holds considerable sway: the owner’s manual. Buried within its pages lie the manufacturer’s recommendations, carefully calibrated instructions regarding the vehicle’s care. For the new owner, the section addressing lubricant replacement intervals represents a critical first step toward ensuring engine longevity. These guidelines, often expressed in terms of mileage or time, serve as the foundational advice for determining the opportune moment for the initial service.
-
The Science Behind the Schedule
Vehicle manufacturers invest considerable resources in engineering and testing to determine optimal maintenance schedules. This process involves analyzing engine design, materials, and operating conditions to predict wear rates and lubricant degradation. The resulting recommendations are not arbitrary figures, but data-driven guidelines intended to balance engine protection with cost-effectiveness. Deviating from these recommendations without a thorough understanding of the underlying principles can lead to both premature wear and unnecessary expenses.
-
The “Normal” vs. “Severe” Dichotomy
The manual often delineates between “normal” and “severe” operating conditions, a distinction that directly impacts lubricant replacement intervals. “Normal” conditions typically encompass highway driving at moderate speeds, while “severe” conditions include frequent short trips, stop-and-go traffic, towing, and extreme temperatures. Ignoring this distinction can lead to misinterpretations. An owner primarily driving in urban environments, mistakenly adhering to the “normal” schedule, risks accelerated engine wear and potential damage. Understanding and accurately assessing the vehicle’s operating conditions are paramount to tailoring the maintenance schedule accordingly.
-
Warranty Implications
Strict adherence to the manufacturer’s recommended maintenance schedule is often a prerequisite for maintaining warranty coverage. Failure to perform lubricant changes at the specified intervals can provide grounds for denying warranty claims related to engine damage. While aftermarket lubricants and filters may be permissible, deviating significantly from the prescribed schedule creates a potential liability for the owner. Meticulous record-keeping of all maintenance performed, including dates, mileage, and receipts, is essential for demonstrating compliance with warranty requirements.
-
Evolving Recommendations
Manufacturer’s recommendations are not static pronouncements, etched in stone for the vehicle’s lifespan. Advancements in lubricant technology and engine design often lead to revisions in recommended intervals. Owners should consult updated service bulletins and technical service publications to ensure they are following the most current guidelines. Furthermore, consulting with a qualified mechanic can provide valuable insights into the specific needs of the vehicle, potentially leading to adjustments in the maintenance schedule based on real-world performance and local conditions.
The manufacturer’s recommendations serve as a crucial starting point in determining when to perform the initial lubricant replacement on a new car. While these guidelines provide a valuable framework, owners must also consider their individual driving habits, environmental conditions, and warranty requirements. A balanced approach, combining the manufacturer’s expertise with informed judgment, is essential for ensuring optimal engine health and maximizing the vehicle’s lifespan. The owner’s manual is not merely a piece of paper, but a roadmap to responsible vehicle ownership.
5. Oil Type
The narrative of an engine’s health often hinges on a seemingly simple choice: the type of lubricant coursing through its veins. This decision, regarding oil type, exerts a palpable influence on the timing of the initial lubricant change and subsequent maintenance intervals. Consider two identical vehicles, fresh from the assembly line. One is filled with conventional oil, the other with a synthetic blend. The former, a product of traditional refining processes, offers dependable lubrication but possesses inherent limitations in extreme temperatures and prolonged use. The latter, engineered through advanced chemical synthesis, boasts enhanced resistance to thermal breakdown and oxidation. The differing properties immediately establish divergent maintenance trajectories. The vehicle using conventional oil will necessitate an earlier lubricant change, its protective capabilities waning more rapidly under stress. This need arises from the quick oil degradation compared to the synthetic blend. The owner’s manual, while offering general guidelines, implicitly acknowledges this variability. It often presents different maintenance schedules dependent on the type of lubricant employed, reflecting the causal link between oil composition and service requirements.
Imagine a fleet of delivery vans, each subjected to the rigors of stop-and-go traffic and heavy loads. The operator, seeking to minimize downtime and reduce maintenance costs, opts for a full synthetic oil in each vehicle. This decision, driven by economic considerations, directly impacts the frequency of lubricant changes. The superior stability of the synthetic oil allows for extended intervals between services, reducing the overall cost of maintenance and maximizing the vehicles’ operational uptime. However, the benefits extend beyond mere cost savings. The enhanced protection afforded by synthetic oil translates into reduced engine wear, contributing to a longer lifespan for the fleet. Conversely, a budget-conscious individual, prioritizing initial cost savings over long-term benefits, may choose conventional oil for their personal vehicle. This decision, while seemingly economical in the short term, necessitates more frequent lubricant changes, potentially offsetting the initial savings over time. The choice of lubricant becomes a calculated risk, weighing the immediate cost against the potential for increased maintenance and accelerated wear.
Ultimately, the selection of oil type and the scheduling of the initial lubricant change are inextricably intertwined. Understanding the properties of different lubricants, and aligning that knowledge with the vehicle’s operating conditions, is paramount to responsible ownership. While the manufacturer’s recommendations provide a starting point, the informed owner recognizes that the choice of oil type represents a pivotal decision, shaping the vehicle’s maintenance trajectory and influencing its long-term health. The story of “when to get first oil change on new car” isn’t complete without understanding the significance of oil type. This ensures a lasting and efficient vehicle lifespan.
6. Engine type
The heart of any vehicle, its engine, dictates a unique rhythm of maintenance. This rhythm, subtly influenced by the engine’s fundamental design, directly impacts the timing of its inaugural lubricant replacement. Recognizing this connection is paramount to ensuring longevity and optimal performance. The following points address engine design, oil capacity, materials used, and usage.
-
Design Configuration
Inline, V-shaped, or horizontally opposed configurations present distinct thermal and mechanical profiles. A turbocharged engine, for instance, generates significantly more heat than its naturally aspirated counterpart. This elevated temperature accelerates oil degradation, necessitating earlier lubricant changes. Similarly, an engine with tighter tolerances, like those found in performance vehicles, may require a lubricant change sooner to remove microscopic wear particles generated during the break-in period. The intricate design dictates the pace, and the service schedule must adapt.
-
Oil Capacity
The volume of lubricant within the engine acts as a buffer against degradation. A larger oil capacity extends the time it takes for contaminants to reach critical levels, potentially allowing for longer service intervals. Conversely, an engine with a smaller oil capacity requires more frequent lubricant changes to maintain adequate protection. Picture two engines, identical in every aspect except oil capacity. The engine holding less lubricant will demand greater diligence, lest the accumulating debris overwhelm the system.
-
Material Composition
The metals and alloys comprising the engine block and internal components influence the rate of wear and the type of contaminants released into the oil. An engine with aluminum components, for example, may generate different wear particles than an engine with a cast-iron block. These particles, suspended within the lubricant, can accelerate wear if not removed through regular maintenance. The composition of the engine, often unseen, dictates the nature of the oil’s burden.
-
Operational Demands
Consider two engines of the same type, one subjected to light-duty use in a passenger car, the other enduring heavy-duty cycles in a commercial vehicle. The latter endures a much more grueling existence. This contrast underscores the critical role of operational demands. The engine under greater strain will generate more heat and accumulate contaminants at a faster rate, thereby shortening its maintenance window. The same engine, yet a world of difference in service requirements.
These varied aspects of engine construction and usage form a intricate matrix influencing lubricant health and change schedules. The type of engine matters, as the change schedule is not merely a suggestion but a carefully crafted response to the engine’s unique characteristics. These facets all tie directly to the original point of “when to get first oil change on new car”.
7. Severe Conditions
The tranquility of routine maintenance schedules shatters when the specter of harsh operating environments arises. Severe conditions, a collective term for demanding driving circumstances, profoundly alter the cadence of required lubricant changes, particularly the crucial initial service. Ignoring this influence invites accelerated wear and potential mechanical distress.
-
Extreme Temperatures: The Crucible of the Engine
Imagine a delivery truck navigating the searing heat of a desert landscape or the frigid expanse of an arctic winter. Both extremes strain the oil’s capacity. High temperatures induce thermal breakdown, reducing viscosity and diminishing its protective properties. Conversely, sub-zero conditions can thicken the oil, hindering its flow and starving critical components of lubrication. These conditions may be a call for when to get first oil change on new car, a shorter time frame than normally planned.
-
Stop-and-Go Traffic: An Urban Gauntlet
Envision a taxi weaving through congested city streets, its engine repeatedly accelerating and decelerating. This constant cycle prevents the oil from reaching optimal operating temperature, leading to fuel dilution and the accumulation of contaminants. Short trips exacerbate the problem, as moisture and combustion byproducts fail to evaporate. In this environment, adherence to a “normal” maintenance schedule proves insufficient, as the lubricant is subject to a relentless assault. Under severe conditions, a shortened time is more practical for when to get first oil change on new car.
-
Dust and Debris: The Insidious Infiltrators
Consider a construction vehicle traversing unpaved roads, enveloped in clouds of dust and grit. Abrasive particles inevitably find their way into the engine, contaminating the oil and accelerating wear on critical components. Off-roading vehicles face similar challenges, battling mud, sand, and water. In such environments, air filtration systems alone cannot provide complete protection. More frequent lubricant changes become a necessity, flushing out the abrasive contaminants and preserving the engine’s integrity. The conditions are severe, causing increased risk that may impact when to get first oil change on new car.
-
Towing and Heavy Loads: The Burden of Work
Picture a pickup truck laboring up a steep incline, burdened by a heavy trailer. The engine strains under the load, generating excessive heat and placing immense stress on the lubricating fluid. Towing and hauling significantly increase the engine’s workload, accelerating oil degradation and potentially leading to catastrophic failure. Vehicles subjected to these conditions require a more conservative maintenance schedule, prioritizing engine protection over adherence to manufacturer’s recommendations. In these cases, if the conditions are severe enough, consult the owner’s manual to know when to get first oil change on new car.
These examples highlight a crucial point: severe conditions demand a proactive approach to maintenance. The recommended intervals, carefully calibrated for “normal” driving, become inadequate when the vehicle faces exceptional demands. An informed owner recognizes the signs of severe operation and adjusts the maintenance schedule accordingly, safeguarding the engine and preserving its long-term reliability. “When to get first oil change on new car” is a very important topic to follow with new cars.
8. Oil Life Monitor
The oil life monitor, a digital sentinel in modern vehicles, represents a departure from rigid, mileage-based maintenance schedules. Its existence directly influences the decision of when to perform that crucial first lubricant replacement, transforming a static calculation into a dynamic assessment.
-
Algorithm’s Core: Beyond Simple Mileage
The monitor is not a mere odometer. It functions via a sophisticated algorithm, tracking various parameters beyond distance traveled. Engine temperature, operating hours, and driving conditions contribute to its calculations. Imagine two identical vehicles, one consistently navigating highway stretches, the other confined to stop-and-go city traffic. The monitor in the latter will likely trigger a service alert far sooner, reflecting the increased strain on the lubricant. The algorithm tailors the schedule to the vehicle’s specific usage, a significant refinement over fixed mileage intervals.
-
Learning Curve: Adapting to the Driver’s Habits
Some advanced systems possess a learning capability, adapting to the driver’s long-term habits. A driver with a consistently aggressive driving style, characterized by frequent acceleration and hard braking, will experience a more rapid depletion of the oil’s life. The monitor, recognizing this pattern, will adjust the service schedule accordingly. This personalized approach ensures that the lubricant is replaced when its protective properties are truly compromised, rather than adhering to an arbitrary timeline.
-
Human Element: The Importance of Vigilance
Despite the sophistication of these monitors, human oversight remains essential. Regularly checking the oil level and visually inspecting its condition can reveal problems that the algorithm may not detect. A sudden drop in oil level, or the presence of unusual contaminants, warrants immediate attention, regardless of the monitor’s indication. The technology serves as a valuable tool, but it cannot replace the driver’s responsible observation.
-
Reset Procedure: A Critical Step
Following a lubricant replacement, properly resetting the oil life monitor is paramount. Failure to do so renders the system inaccurate, potentially leading to premature or delayed servicing. Imagine a scenario where the monitor continues to operate under the previous parameters, unaware of the fresh lubricant. The driver, relying on the incorrect information, may unknowingly subject the engine to undue stress. The reset procedure is not a mere formality, but an essential step in maintaining the system’s accuracy.
The oil life monitor represents a significant advancement in vehicle maintenance, offering a dynamic assessment of lubricant condition and influencing the crucial decision of when to schedule that initial service. However, the technology is not infallible. Responsible ownership necessitates a combination of technological reliance and human vigilance, ensuring optimal engine health and maximizing vehicle longevity. That point will impact “when to get first oil change on new car”.
Frequently Asked Questions
Embarking on vehicle ownership often begets a flurry of inquiries, particularly concerning the critical first lubricant change. Herein lie clarifications to demystify this essential maintenance procedure.
Question 1: Is the “factory fill” oil different and requiring a shorter interval?
The notion that initial factory-fill oil demands accelerated replacement is largely a relic of the past. Modern manufacturing processes significantly reduce engine break-in debris. While earlier replacement may offer a psychological comfort, strict adherence to the manufacturer’s recommended interval is generally sufficient.
Question 2: Can synthetic oil extend the first change interval beyond manufacturer recommendations?
While synthetic lubricants offer superior protection, deviating from the manufacturer’s prescribed schedule, even for the initial service, introduces potential warranty complications. The extended capabilities of synthetic oil are best realized within the boundaries set by the vehicle’s warranty stipulations. Prudence suggests aligning with the established guidelines.
Question 3: Does infrequent vehicle use negate the need for a timely first lubricant change?
The oxidation and degradation of lubricant occur regardless of mileage accumulation. Even a sparingly used vehicle requires adherence to the time-based recommendation for its initial service. Neglecting this temporal element can compromise the oil’s protective properties, inviting undue engine wear.
Question 4: How does “severe driving” impact the timing of the first change?
Vehicles subjected to arduous conditions frequent short trips, towing, or extreme temperatures necessitate an earlier first lubricant change. These factors accelerate oil degradation, demanding proactive maintenance. The manufacturer’s “severe service” schedule should be diligently consulted.
Question 5: Does an oil life monitoring system eliminate the need for manual checks and scheduled services?
Oil life monitoring systems offer sophisticated estimations, but reliance solely on these systems is unwise. Regular manual checks of oil level and visual inspection remain crucial. The monitor serves as a guide, not a replacement for diligent observation. Trust, but verify.
Question 6: Can the initial lubricant change be skipped entirely, relying solely on the oil filter’s effectiveness?
The oil filter, while essential, cannot eliminate all contaminants. Microscopic wear particles and chemical byproducts accumulate within the lubricant, necessitating periodic replacement. Skipping the initial change compromises the oil’s integrity, potentially diminishing engine lifespan. Preventative maintenance is a far less costly course than reactive repair.
The timing of the inaugural lubricant exchange is a nuanced decision, balancing manufacturer’s guidelines with real-world conditions. Adherence to a proactive maintenance strategy proves invaluable in safeguarding engine health.
The subsequent sections will delve into the pragmatic aspects of performing the lubricant change, providing guidance for both the novice and experienced vehicle owner.
Navigating the First Lubricant Change
A new car gleams, a testament to engineering and aspiration. Yet, beneath the polished exterior lies a mechanical ballet dependent on proper care. The initial lubricant change represents a pivotal moment, a first step down a path of either longevity or neglect.
Tip 1: Consult the Oracle of the Owner’s Manual: Every vehicle speaks through its manual, a repository of manufacturer’s wisdom. Heed its guidance on initial lubricant change intervals, factoring in “normal” versus “severe” operating conditions. This document is the cornerstone of informed maintenance decisions, grounding actions in expertise.
Tip 2: Embrace the Wisdom of Time: Mileage alone tells an incomplete story. Oil degrades over time, regardless of distance traveled. Adhere to the time-based recommendation, typically six months or one year, even if the odometer remains relatively unchanged. This shields the engine from the insidious effects of oxidation and chemical breakdown.
Tip 3: Acknowledge the Demands of Duty: Short trips, heavy towing, and extreme temperatures exact a toll. Vehicles subjected to these “severe” conditions require more frequent lubricant changes. Disregard this reality, and the engine faces accelerated wear, a price far exceeding the cost of preventative maintenance.
Tip 4: The Oil Life Monitor: A Guiding Star, Not an Absolute Authority: Embrace the technological aid of the oil life monitoring system, but temper its influence with personal observation. Regularly check the oil level and visually inspect its condition. Trust the monitor’s guidance, but never relinquish the responsibility of human assessment.
Tip 5: The Synthetic Choice: A Prudent Investment: Consider the merits of synthetic lubricants, renowned for their enhanced protection and extended service intervals. While synthetic oil may command a higher initial cost, its long-term benefits, including reduced wear and improved fuel efficiency, often justify the investment.
Tip 6: Document the Deed: A Chronicle of Care: Maintain meticulous records of all maintenance performed, including dates, mileage, and lubricant specifications. These records not only facilitate informed decision-making, but also serve as evidence of responsible care, potentially safeguarding warranty coverage and enhancing resale value.
By considering these tips, the owner will impact “when to get first oil change on new car” will have a lasting impact on engine life. This practice safeguards the engine and shows dedication to proactive service and longevity.
The saga of the initial lubricant change is not merely a tale of mechanics and schedules, but a narrative of diligence, informed decision-making, and respect for the intricate machinery entrusted to one’s care. The subsequent chapters will examine the intricacies of lubricant selection and the art of performing the change, offering practical guidance to those seeking to ensure their vehicle’s continued prosperity.
When to get first oil change on new car
The journey through the intricacies of “when to get first oil change on new car” reveals a landscape far more nuanced than a simple mileage marker. This exploration emphasizes the interplay of manufacturer’s recommendations, driving habits, environmental factors, and technological advancements. The pivotal decision is not merely about adherence to a schedule, but an informed assessment of the vehicle’s operational reality.
In the chronicles of vehicle ownership, the initial lubricant change stands as a defining chapter. It represents a commitment to proactive care, a recognition of the intricate dance of mechanics unfolding beneath the hood. Embrace this opportunity to safeguard the engine’s future, ensuring that its story is one of enduring performance, not premature decline. By considering “when to get first oil change on new car”, one safeguards the investment and ensures continued journey.
